Pump Solutions

Engineered Product Solutions for Municipal Water, Wastewater, & Irrigation Markets

We provide application support for:

Engineered Flow Curve Design
Specifications & Dimensional Drawings
Project Startup
Project Design Solutions
Field Service
Replacement Parts
Pump & Motor Facility

Wilo

Long-standing experience in the project work for sewage technology allows us to provide smooth processes and reliable system solutions. Whether it be pumping, mixing, aerating, filtering or disinfecting of (waste) water that is concerned, our broad portfolio of products and system solutions will in any case provide you with a reliable and energy-efficient solution. Depending on demand, volume flow and delivery head, you will find pumps at Wilo for a wide range of fluids, such as sewage, sludge and sludge water, and abrasive or fibrous fluids. We particularly focus on the lowest possible wear and robust components in our solutions.

WILO-REXA CUT

FEATURES:

International standard design: industrial-grade cable, air-cooled motor, silicon carbide seals, & highest-grade cast iron construction
P/U/E impellers capable of performing in sewage applications with solids & fibrous materials
Full range of pumps capable of meeting high head and/or high flow duty points & applications
Epoxy-coated surfaces to protect exterior during life of operation
5Hp & above comes standard with seal leak protection, thermal protection, and 50-ft cable
Integrates air lock valve

APPLICATIONS:

Municipal: Wastewater treatment plants, wastewater transfer, wastewater lift stations, subdivisions, airports, and storm water removal
Commercial: apartments, hospitals, building wastewater systems, motels, schools, universities, amusement parks, campgrounds, and churches
Industrial: Storm water, wastewater, spray wash, and sump

WILO-REXA PRO

FEATURES:

Clog-resistant vortex impeller
FM explosion-proof rated
Dual mechanical shaft seals
Watertight cable inlet
Quick and easy installation

APPLICATIONS:

Wastewater and sewage
Domestic and site drainage
Sludges up to 8% dry matter
Municipal and industrial applications

BOOSTER SYSTEMS

FEATURES:

Water Supply
Pressure Boosting
Agriculture
Washing / Sprinkling Systems
Cooling Circuits
Condensate Return

APPLICATIONS:

Real-time diagnostics and remote monitoring
Full system kWh energy reporting
Easy to use 7” touchscreen interface
Onboard MODbus and optional BACnet and LONworks interface
Variable speed control per pump
Adjustable low pressure cut-out
Balanced run time for all pumps

WILO-FA

FEATURES:

International standard design: epoxy resin-sealed cable, dry motor, motor protectors, silicon carbide seals, & highest-grade cast iron construction
Tungsten carbide-edged impeller is perfect for pumping sewage & breaking/tearing debris
Superior abrasion-resistant silicon carbide mechanical seal to ensure best seal
C-type impeller vanes shred against inner cutting blades to break down destructible solids
Heat-treated casing cover designed to withstand abrasions

APPLICATIONS:

Drainage of effluent containing debris from factories
Effluent management, water accumulation, and/or farms

PACKAGED SYSTEMS

FEATURES:

Fiberglass basin package systems with pumps, valves, piping, and cover
Thick walled basin with anti float flange and lift lugs
Studded for quick remove systems
Discharge coupling plates

APPLICATIONS:

Below ground sump and sewage pits
Below cover or through-cover designs

Peerless

Peerless Pump is the leading manufacturer of horizontal and vertical pumps with installations in Commercial Buildings, Municipal Facilities, Industrial Warehouse and Manufacturing, including all aspects of the Power & Energy market. We are an ISO 9001 facility providing high quality products in a variety of materials and configurations to meet the pumping needs of the 21st Century.

PUMP

FEATURES:

The casing material is a minimum of class 35 cast iron
Renewable bronze casing rings
The double suction impeller
Grooved impeller skirts
Peerless Pump standard mechanical seals
Optional packed stuffing boxes
Replaceable bronze shaft sleeves
Bearings with 100,000 hours average life

Flows: Over 8,000 GPM

Total Dynamic Head: Up to 675 feet

APPLICATIONS:

Water and other non-abrasive fluids
From small, single-pump commercial installations to large, multi-pump municipal water supply systems
Agriculture
Industrial
Building trade
Energy
Fire protection
Municipal
Process

VERTICAL

TURBINE PUMPS

FEATURES:

The pump casing material is a minimum of class 30 cast iron
Cast bronze, one-piece impeller
Stuffing boxes
Replaceable bronze or optional hardened 416 stainless steel shaft sleeves
Pump and driver are mounted on a common steel base (optional drip rim)

Flows: Up to 100,000 GPM

Total Dynamic Head: Up to 2,500 feet

APPLICATIONS:

Well water
Water lift from lakes, rivers, oceans, etc.
Booster applications
Cooling towers
Industrial process
Agriculture

TU & TUT
PUMPS

FEATURES:

Pump casing material is a minimum of class 40 cast iron
Alternate volutes are reversed, balancing transverse pressures on running members
Bearing bracket supports are cast integral with the lower casing half
Bronze, renewable casing rings are doweled and shouldered in the casing
Cast bronze, enclosed type, single suction impellers are carefully machined and are dynamically balanced for vibration-free performance and longer bearing life
Impellers are keyed to the shaft for positive driving
Bronze impeller wear rings are available

Flows: Up to 6,000 GPM

Total Dynamic Head: Up to 1,600 feet

APPLICATIONS:

Boosting
Water treatment

MIXED FLOW
PUMPS

FEATURES:

Complete Unit Responsibility
State-of-the-art Engineering Designs
Value-added Services for Customer
Reduced Installation Costs
Worldwide Technical and Commercial Support
ISO 9001 Manufacturing Facility

Flows: 200,000 Up to USGPM

Total Dynamic Head: Up to 100 feet

APPLICATIONS:

Sewage Treatment
Flood Mitigation
Aquaculture/Fish Farming
Mining
Dewatering

VCS
PUMPS

FEATURES:

Registered fits at every joint to assure and hold straight shaft alignment
Heavy duty sleeve-type shaft bearings and bearing housings for tough, rugged construction
Expansion joints at critical locations to eliminate mechanical binding as a result of temperature changes
Many options-accessories and materials of construction- to assure the ideal pump for your application

Flows: Up to 900 GPM

Total Dynamic Head: Up to 110 feet

APPLICATIONS:

Recommended for pumping water borne sewage, trash and waste.
Commercial Buildings
Public Buildings
Industrial Plants

Crane

The Barnes product family, developed by Crane, provides versatility, high performance and unequaled value. Engineers, plumbing contractors and homeowners have continued to depend on Barnes pumps for reliability and durability since the brands’ founding in 1895. From essential applications like sewage and wastewater to fountain pumps and revolutionary pressure sewer systems, Barnes pumps deliver innovative, cost-effective solutions supported by best-in-class service.

SITHE CHOPPER

PUMP

FEATURES:

Heat Treated Chopper Blades & Open Center Cutter Design
Explosion Proof Design – Class 1, Division 1, Groups C & D, T4
Variable Frequency Drive Rated Class H Varnish & Magnet Wire
Plug-n-Play “Quick Connect” Cord With Integral Temperature & Moisture Sensors – Simplifies Maintenance
CSA Certified
Double Mechanical Seals & Heavy Duty Oil Lubricated Bearings
Stainless Steel Lifting Bail And Hardware
White Iron Impellers Available For Abrasive Conditions

APPLICATIONS:

Municipal Wastewater
Raw Sewage
Influent/Effluent Removal
RAS/WAS Sludge
Abrasive Wastewater Applications

SH SOLIDS

HANDLING PUMP

FEATURES:

Superior solids passing with less clogging
Variable Frequency Drive rated H-Class windings
Plug-n-Play 30,50,75-foot cord for 30 HP & LG35; simplifies maintenance needs
Cast iron construction
Temperature and moisture sensors
50,000 hour minimum bearing life
Stainless steel lifting bail and hardware
Expolsion proof, class 1 division 1, groups C & D, T4
CSA/ FM
125 lb. horizontal flange, slotted to accomodate 100 mm 150 flange

APPLICATIONS:

Municipal Wastewater
Raw Sewage
Influent/Effluent Removal
RAS/WAS Sludge
Abrasive Wastewater Applications

SELF PRIMING

SOLIDS HANDLING PUMP

FEATURES:

Cast Iron Construction
Two vane, ductile iron open impeller
High carbon steel shaft
Corrosion resistant hardware
Single mechanical seal, grease lubricated-buna/carbon/ceramic

APPLICATIONS:

Industrial (Raw Water, Wastewater, Barge Stripping)
Municipal (Liftt Station, Sewage Treatment, Digesting Sludge)

BLADE NGV/XGV

GRINDER PUMP

FEATURES:

Barnes Slicerator ™ radial cutting technology
plug-n-play “Quick Connect” cord
Oil filled motor

APPLICATIONS:

Demanding high head, high flow applications involving troublesome solids like plastics, ropes, diapers and cloth materials

NSF 61 / 372

PUMP

FEATURES:

Lead Free Construction
FDA Approved Mechanical Seals
Standard 416SS Shaft & Sleeveless Design
Separate, Adjustable Motor Mounting Plate For Acccurate Lasting Alignment
Permanently Bolted & Doweled-To-Base At Factory To Prevent Pump Movement And Misalignment
Standard Spacer-Type Coupling For Easy Replacement Of Seals & Bearings Without Removing Motor Or Top Casing
Robust Reliable Design With Thrust Collar & Lip Seal
Easier Lifting & Installation Lifting With Holes At Top & Side Of Base

APPLICATIONS:

Clean & Drinking Water Applications
General Water Service
Domestic Water Booster System
Chilled Water Systems

NON-CLOG PUMP

(DRY PIT)

FEATURES:

Capable of handling 3 to 5 inch solids.
All iron construction
Regreasable bearings
416SS shaft sleeve
External impeller adjustment
Choice of rotation
Suction elbow with hand-hole cleanout on verticle styles
Pump out vanes on back of impeller
Mechanical seals available

APPLICATIONS:

Sanitary Wastes
Industrial Wastes
Process Wastes
Pollution Control
Cannery & Meat Process Wastes
Storm Water Runoff

HCP

HCP PUMP serves the commercial, industrial, and municipal industries; their products can be used in any applications from lift stations and water treatment plants to water features and dewatering.

hcp-pumps_af-series-waste-water-pumps.pn

AF SERIES SUBMERSIBLE

SEWAGE/WASTEWATER PUMPS

FEATURES:

International standard design: industrial-grade cable, air-cooled motor, silicon carbide seals, & highest-grade cast iron construction
P/U/E impellers capable of performing in sewage applications with solids & fibrous materials
Full range of pumps capable of meeting high head and/or high flow duty points & applications
Epoxy-coated surfaces to protect exterior during life of operation
5Hp & above comes standard with seal leak protection, thermal protection, and 50-ft cable
Integrates air lock valve

APPLICATIONS:

Municipal: Wastewater treatment plants, wastewater transfer, wastewater lift stations, subdivisions, airports, and storm water removal
Commercial: apartments, hospitals, building wastewater systems, motels, schools, universities, amusement parks, campgrounds, and churches
Industrial: Storm water, wastewater, spray wash, and sump

AL SERIES SUBMERSIBLE

DEWATERING PUMPS

FEATURES:

Equipped with thermal motor protector & epoxy cable base treatment
Compact design, high head, and high efficiency for wide range of uses
7.5–15Hp triangular handle design for easy handling on guide rail systems
Water resistant and IP68 compliant
Entire cast iron construction
Pressure-reducing design

APPLICATIONS:

All-industry drainage
Surface drainage & flood water removal
River & lake water extraction

GF SERIES SUBMERSIBLE

GRINDER PUMPS

FEATURES:

Vortex impeller design prevents clogging
Radial cutter/cutter ring are corrosion-resistant & hardened to 55–60 Rockwell C
Single phase grinder pump equipped with centrifugal switch & internal capacitor motor design provides 5x higher torque than average capacitor-starting motor
Standard accessories include an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design

APPLICATIONS:

Pressure sewage systems
Draining wastewater from residences, apartments, recreational developments, and motels
Transferring wastewater from commercial buildings, industrial plants, wastewater sampling, and hospitals
Draining wastewater from schools and federal, state, and local parks

LA SERIES SUBMERSIBLE

AXIAL FLOW PUMPS

FEATURES:

Motor connects directly to impeller for highest efficiency
Shaft & impeller precisely balanced to reduce noise & extend product life
Standard protection: thermal protector & mechanical leakage detector; other protection devices available
Design of impeller & vanes produces higher pump efficiency
Equipped with sacrificial anodes, highly active metals used to prevent a less active material surface from corroding reduces rusting corrosion in sea water & increases pump lifetime

APPLICATIONS:

Industrial water supply/drainage
Large volume dewatering
Large-scale aquaculture farming
Flood control

SUCTION LIFT SERIES

SELF-PRIMING PUMPS

FEATURES:

Capable of priming without flap valve
Non-clogging & capable of handling large solids
Unique lubrication of mechanical seal cavity makes performance more reliable
Low rotary speed, reliable operation, easy maintenance, & long product life
Equipped with pressure relief valve, solids-handling impeller, abrasion-resistant seal, removable cover plate with easy grip handle, replaceable wear plate, & removable rotating assembly

APPLICATIONS:

Municipal, residential, & industrial uses
Suitable for paper mills, mines, poultry, & construction sites